Tree removal in Ellenborough 2446
Thinking of removing or pruning a tree in Ellenborough? The rules here are set by Port Macquarie-Hastings Council. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Ellenborough
State Environmental Planning Policy (Biodiversity and Conservation) 2021, Ch. 2 (Vegetation in Non-Rural Areas) + each council's Development Control Plan (DCP).
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Port Macquarie-Hastings Council?
Trees about 3m tall or 10cm trunk (diameter at 1.0m above ground level) or larger are generally protected and need approval.
Clause 5.9(2) of LEP 2011 applies to trees listed in Table 2.6.1 (Koala Food Trees) AND any tree 3m+ height or 100mm diameter. Koala habitat trees require 2:1 replacement ratio. Heritage item trees require development consent regardless of size.
When you may not need approval
- trees within 3m of existing dwelling on same property (except Core Koala Habitat)
- dead branches up to 50mm diameter
- removal of noxious weeds
- heritage exemptions under LEP clause 5.9(7)
Do I need a permit in Ellenborough?
Answer a few questions for an instant, indicative result based on Port Macquarie-Hastings Council's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.