Tree removal in Glenelg
Thinking of removing or pruning a tree in Glenelg? The rules here are set by Holdfast Bay. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Glenelg
Planning, Development and Infrastructure Act 2016 + Planning and Design Code: Regulated and Significant Trees.
Which trees are protected in Holdfast Bay?
In SA, a 'regulated tree' (trunk circumference 1m+ / about 32cm diameter at 1m height) generally needs development approval to remove, with exemptions for small trees, certain species, and trees within 3m of a dwelling.
When you may not need approval
- Trees with a trunk circumference under 1 metre (about 32cm diameter at 1m height).
- Within 3 metres of an existing dwelling or in-ground pool on the same allotment, except Willow Myrtle, Angophora, Corymbia or Eucalyptus.
- One of the 24 species on the Minister's exempt species list (e.g. camphor laurel, weeping willow, most figs).
- Dead trees. Urgent work to protect a person or building is allowed, but you must notify council and apply for approval within 28 days.
Do I need a permit in Glenelg?
Answer a few questions for an instant, indicative result based on Holdfast Bay's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.
Tree removal in Glenelg: common questions
Do I need council approval to remove a tree in Glenelg?
Tree removal in Glenelg is regulated by Holdfast Bay. In SA, a 'regulated tree' (trunk circumference 1m+ / about 32cm diameter at 1m height) generally needs development approval to remove, with exemptions for small trees, certain species, and trees within 3m of a dwelling. Use the checker on this page for an indication, then confirm with Holdfast Bay.
Which council covers Glenelg?
Glenelg is in the Holdfast Bay local government area.