Tree removal in Paxton 2325
Thinking of removing or pruning a tree in Paxton? The rules here are set by Cessnock City Council. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Paxton
State Environmental Planning Policy (Biodiversity and Conservation) 2021, Ch. 2 (Vegetation in Non-Rural Areas) + each council's Development Control Plan (DCP).
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Cessnock City Council?
Trees about 3m tall or larger are generally protected and need approval.
Permits required for trees ≥3m height AND ≥3m crown spread; exempt if either threshold unmet. Exemptions: dead/dying trees, noxious species by name (Camphor Laurel, Willow, etc.), ornamental pruning per accepted practice, trees with trunk <3m from building, Council-approved development work, bushfire risk reduction (fuel-free zones, 14-day notice), and roads authority work. Note: specific Act citations lack official support; contact Council directly for biosecurity/water management/weeds act applicability.
When you may not need approval
- Trees less than 3m height AND less than 3m branch spread
- Noxious weeds (Noxious Weeds Act 1993)
- Environmental weeds
- Within 3m of existing/proposed approved building
Do I need a permit in Paxton?
Answer a few questions for an instant, indicative result based on Cessnock City Council's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.