TreeQuotesKnow the tree rules for your suburbCheck my tree

Tree removal in Brisbane City 4000

Thinking of removing or pruning a tree in Brisbane City? The rules here are set by Brisbane. Check whether you likely need approval, then get free quotes from licensed local arborists.

Get free quotes

We're a free referral service, not an arborist. We collect these details only to match you with licensed arborists. See our Privacy Policy and Terms.

Tree rules in Brisbane City

Planning Act 2016 + council local laws and Vegetation Protection Orders; Vegetation Management Act 1999 (mainly rural/native vegetation).

● Researched· last checked 2026-06-29official source ↗

Compiled from the council's published rules and cross-checked. Always confirm with the council.

Which trees are protected in Brisbane?

Trees about 30cm trunk (diameter at 1.4m above natural ground level; garden trees over 30cm require permit; Schedule 2 species 60-100cm thresholds) or larger are generally protected and need approval.

Brisbane protects vegetation through multiple layers: Significant Urban Vegetation (SUV mapped areas), Significant Landscape Trees (Schedule 2 species with 60-100cm thresholds), Significant Native Vegetation (SNV mapped areas), Waterway/Wetland Vegetation, and Vegetation Protection Orders. Protection based on geographic zones, vegetation registers, species-specific thresholds, GIS mapping, NOT universal size cut-off. Garden trees over 30cm trunk diameter also protected. Most residential trees fall under protection via SUV classification.

When you may not need approval

  • Emergency tree removal with photographic evidence within 10 days
  • Trees less than 20cm trunk diameter in specific contexts (dead trees/limbs, boundary fences)
  • Routine pruning of non-significant vegetation (max 20% foliage removal per 12 months)
  • Utility maintenance pruning
Full Brisbane tree rules →

Do I need a permit in Brisbane City?

Answer a few questions for an instant, indicative result based on Brisbane's rules.

Checking against Brisbane (for Brisbane City).

Tip: Brisbane measures trunk size as diameter at 1.4m above natural ground level; garden trees over 30cm require permit; Schedule 2 species 60-100cm thresholds, so confirm the exact figure on their page.

Fill in the tree details and we'll estimate whether you likely need council approval.

Tree removal in Brisbane City: common questions

Do I need council approval to remove a tree in Brisbane City?

Tree removal in Brisbane City is regulated by Brisbane. Trees about 30cm trunk (diameter at 1.4m above natural ground level; garden trees over 30cm require permit; Schedule 2 species 60-100cm thresholds) or larger are generally protected and need approval. Use the checker on this page for an indication, then confirm with Brisbane.

Which council covers Brisbane City?

Brisbane City (4000) is in the Brisbane local government area.

We use essential cookies to run this site and, with your consent, analytics cookies to improve it. See our cookie policy.