TreeQuotesKnow the tree rules for your suburbCheck my tree

Gold Coast tree removal rules

What to check before removing or pruning a tree in the Gold Coast area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.

Get free quotes

We're a free referral service, not an arborist. We collect these details only to match you with licensed arborists. See our Privacy Policy and Terms.

Legal basis: Planning Act 2016 + council local laws and Vegetation Protection Orders; Vegetation Management Act 1999 (mainly rural/native vegetation).

● Researched· last checked 2026-06-29official source ↗

Compiled from the council's published rules and cross-checked. Always confirm with the council.

Which trees are protected in Gold Coast?

Trees about 4m tall / 13cm trunk (circumference 40cm measured 1.3m above ground, converted to diameter) or larger are generally protected and need approval.

Gold Coast applies numeric size thresholds (4m height OR 40cm circumference). Vegetation Protection Orders can be imposed by Council over significant vegetation, triggering additional protection. Planning Scheme Chapter 36 (Vegetation Management Code) governs operational works for vegetation clearing. Thresholds apply to "assessable vegetation" (remnant native, understorey, disturbed/regrowth, or wetland vegetation).

When you may not need approval

  • Dangerous/dead/diseased trees (Level 5 Arborist)
  • Within 3m of existing building foundations or 10m in Rural Domain (>8000m²)
  • Within 3m of property boundary fence
  • Within 1.5m of pool fence
  • Native pest species (Level 3 Arborist)
  • Bushfire hazard reduction in mapped hazard zones
  • Essential maintenance/pruning for service cables
  • Fire management work

How to apply

Operational Works (OPW) application required for removals exceeding thresholds, unless covered by exemptions (dangerous trees, within 3m of buildings/fences, bushfire hazard mitigation, etc.). Contact: 07 5582 8708

Other rules that can override the above

  • Council Vegetation Protection Orders / significant tree registers.
  • State Vegetation Management Act (native vegetation).
  • Federal EPBC Act.

Do I need a permit in Gold Coast?

Checking against Gold Coast.

Tip: Gold Coast measures trunk size as circumference 40cm measured 1.3m above ground, converted to diameter, so confirm the exact figure on their page.

Fill in the tree details and we'll estimate whether you likely need council approval.

Common questions about tree removal in Gold Coast

Do I need a permit to remove a tree in Gold Coast?

Trees about 4m tall / 13cm trunk (circumference 40cm measured 1.3m above ground, converted to diameter) or larger are generally protected and need approval. Exemptions, such as for dead or dangerous trees, may apply. Confirm with Gold Coast before any work starts.

Which trees are exempt in Gold Coast?

Exemptions listed for Gold Coast include: Dangerous/dead/diseased trees (Level 5 Arborist); Within 3m of existing building foundations or 10m in Rural Domain (>8000m²); Within 3m of property boundary fence; Within 1.5m of pool fence; Native pest species (Level 3 Arborist); Bushfire hazard reduction in mapped hazard zones; Essential maintenance/pruning for service cables; Fire management work. Check the council's exact wording before relying on one.

How do I lodge a tree removal application with Gold Coast?

Operational Works (OPW) application required for removals exceeding thresholds, unless covered by exemptions (dangerous trees, within 3m of buildings/fences, bushfire hazard mitigation, etc.). Contact: 07 5582 8708. Check Gold Coast's official tree page (linked on this page) for the current form and fees before you apply.

Which suburbs follow Gold Coast's tree rules?

Suburbs we list in the Gold Coast area include Advancetown, Alberton, Arundel, Ashmore, Austinville, Benowa, Biggera Waters, Bilinga and 73 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.

How much does tree removal cost in Gold Coast?

Most Australian homeowners pay roughly $800–$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.

More help: QLD tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.

Suburbs in Gold Coast

We use essential cookies to run this site and, with your consent, analytics cookies to improve it. See our cookie policy.