Tree removal in Monash
Thinking of removing or pruning a tree in Monash? The rules here are set by Berri Barmera. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Monash
Planning, Development and Infrastructure Act 2016 + Planning and Design Code: Regulated and Significant Trees.
Which trees are protected in Berri Barmera?
In SA, a 'regulated tree' (trunk circumference 1m+ / about 32cm diameter at 1m height) generally needs development approval to remove, with exemptions for small trees, certain species, and trees within 3m of a dwelling.
When you may not need approval
- Trees with a trunk circumference under 1 metre (about 32cm diameter at 1m height).
- Within 3 metres of an existing dwelling or in-ground pool on the same allotment, except Willow Myrtle, Angophora, Corymbia or Eucalyptus.
- One of the 24 species on the Minister's exempt species list (e.g. camphor laurel, weeping willow, most figs).
- Dead trees. Urgent work to protect a person or building is allowed, but you must notify council and apply for approval within 28 days.
Do I need a permit in Monash?
Answer a few questions for an instant, indicative result based on Berri Barmera's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.
Tree removal in Monash: common questions
Do I need council approval to remove a tree in Monash?
Tree removal in Monash is regulated by Berri Barmera. In SA, a 'regulated tree' (trunk circumference 1m+ / about 32cm diameter at 1m height) generally needs development approval to remove, with exemptions for small trees, certain species, and trees within 3m of a dwelling. Use the checker on this page for an indication, then confirm with Berri Barmera.
Which council covers Monash?
Monash is in the Berri Barmera local government area.