Wattle Range tree removal rules
Everything you need to know before removing or pruning a tree in the Wattle Range area — which trees are protected, the main exemptions, and how to apply for approval. This is the authoritative summary we keep for this council; always confirm against the official source linked below.
Legal basis: Planning, Development and Infrastructure Act 2016 + Planning and Design Code — Regulated and Significant Trees.
Which trees are protected in Wattle Range?
In SA, a 'regulated tree' (trunk circumference 1m+ / about 32cm diameter at 1m height) generally needs development approval to remove — with exemptions for small trees, certain species, and trees within 3m of a dwelling.
When you may not need approval
- Trees with a trunk circumference under 1 metre (about 32cm diameter at 1m height).
- Within 3 metres of an existing dwelling or in-ground pool on the same allotment — except Willow Myrtle, Angophora, Corymbia or Eucalyptus.
- One of the ~24 exotic species exempted by the Minister (e.g. some pines, willows).
- Dead trees, and trees that are an imminent risk to life or property.
Other rules that can override the above
- Significant trees (2m+ circumference) are protected even where a regulated tree might be exempt.
- Tree-damaging activity near a regulated/significant tree (e.g. building close to it) can also need approval.
- Federal EPBC Act for nationally listed species/communities.
Do I need a permit in Wattle Range?
Fill in the tree details and we'll estimate whether you likely need council approval.
Suburbs in Wattle Range
- Beachport
- Burrungule
- Canunda
- Clay Wells
- Comaum
- Coonawarra
- Furner
- German Flat
- Glencoe
- Glenroy
- Hatherleigh
- Kalangadoo
- Kangaroo Inn
- Koorine
- Krongart
- Maaoupe
- Magarey
- Millicent
- Moerlong
- Monbulla
- Mount Burr
- Mount Mcintyre
- Nangwarry
- Nora Creina
- Penola
- Rendelsham
- Rocky Camp
- Sebastopol
- Short
- Southend
- Tantanoola
- Thornlea
- Wattle Range
- Wattle Range East
- Wepar