Melbourne tree removal rules
What to check before removing or pruning a tree in the Melbourne area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.
Legal basis: Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Melbourne?
In Melbourne, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below).
The City of Melbourne says it has no authority over trees on private property unless they are on its Exceptional Tree Register, which protects listed trees through the planning scheme (an Environmental Significance Overlay). The register was expanded with 119 more trees, approved by the Minister for Planning in February 2024. Each listed tree has a tree protection zone, and a permit is needed to remove or significantly prune it or to build within that zone. The statewide canopy tree rule also applies in the city's residential zones. Clause 52.37 needs a permit to remove, destroy or lop a canopy tree at least 5m tall with an average canopy at least 4m across: anywhere on a vacant lot, or within 6m of the street frontage or 4.5m of the rear boundary where there is a house. Heritage Overlays can also control trees. For other private trees, Council recommends advice from a qualified arborist.
When you may not need approval
- Dead canopy trees, and the part of a tree that presents an immediate risk of injury or damage, are exempt from the Clause 52.37 permit. Overlays and local laws have their own exemptions, so check those too.
- Maintenance pruning of no more than one third of a canopy tree's foliage is exempt from Clause 52.37 (but not trunk pruning, or pruning that takes the tree below 5m tall or a 4m canopy).
- Land outside the residential zones covered by Clause 52.37 and without a relevant overlay may not need a planning permit, but local laws can still apply.
How to apply
Planning permit through Council's planning team. To remove a tree on the Exceptional Tree Register, the application must include an assessment from an independent arborist, which Council reviews. Building or works inside a registered tree's protection zone, and significant pruning or lopping, also need a permit. Removing one canopy tree under Clause 52.37 can go through the faster VicSmart process.
Other rules that can override the above
- Clause 52.37 canopy tree permits in most residential zones (statewide since 15 September 2025).
- Planning scheme overlays (VPO / SLO / ESO).
- Bushfire (BMO) clearing entitlements in designated areas.
- Federal EPBC Act for nationally listed species/communities.
Do I need a permit in Melbourne?
Fill in the tree details and we'll estimate whether you likely need council approval.
Common questions about tree removal in Melbourne
Do I need a permit to remove a tree in Melbourne?
In Melbourne, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below). Exemptions, such as for dead or dangerous trees, may apply. Confirm with Melbourne before any work starts.
Which trees are exempt in Melbourne?
Dead canopy trees, and the part of a tree that presents an immediate risk of injury or damage, are exempt from the Clause 52.37 permit. Overlays and local laws have their own exemptions, so check those too. Maintenance pruning of no more than one third of a canopy tree's foliage is exempt from Clause 52.37 (but not trunk pruning, or pruning that takes the tree below 5m tall or a 4m canopy). Land outside the residential zones covered by Clause 52.37 and without a relevant overlay may not need a planning permit, but local laws can still apply.
How do I lodge a tree removal application with Melbourne?
Planning permit through Council's planning team. To remove a tree on the Exceptional Tree Register, the application must include an assessment from an independent arborist, which Council reviews. Building or works inside a registered tree's protection zone, and significant pruning or lopping, also need a permit. Removing one canopy tree under Clause 52.37 can go through the faster VicSmart process. Check Melbourne's official tree page (linked on this page) for the current form and fees before you apply.
Which suburbs follow Melbourne's tree rules?
Suburbs we list in the Melbourne area include Carlton, Carlton North, Docklands, East Melbourne, Flemington, Kensington, Melbourne, North Melbourne and 6 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.
How much does tree removal cost in Melbourne?
Most Australian homeowners pay roughly $800–$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.
More help: VIC tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.