Melton tree removal rules
What to check before removing or pruning a tree in the Melton area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.
Legal basis: Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
We're still confirming this council's exact rules, so any figures shown are a general guide only. Confirm with the council.
Which trees are protected in Melton?
Clause 52.37 of every Victorian planning scheme (in force since 15 September 2025) needs a planning permit to remove, destroy or lop a canopy tree (at least 5 metres tall with an average canopy diameter of at least 4 metres) in most residential zones: anywhere on a vacant lot, or within 6 metres of the street frontage or 4.5 metres of the rear boundary where there is a house. Planning overlays on your property (such as a Vegetation Protection Overlay (VPO), Significant Landscape Overlay (SLO) or Environmental Significance Overlay (ESO)) and council local laws can protect other trees. Check your address on VicPlan (mapshare.vic.gov.au) and with your council.
When you may not need approval
- Dead canopy trees, and the part of a tree that presents an immediate risk of injury or damage, are exempt from the Clause 52.37 permit. Overlays and local laws have their own exemptions, so check those too.
- Maintenance pruning of no more than one third of a canopy tree's foliage is exempt from Clause 52.37 (but not trunk pruning, or pruning that takes the tree below 5m tall or a 4m canopy).
- Land outside the residential zones covered by Clause 52.37 and without a relevant overlay may not need a planning permit, but local laws can still apply.
Other rules that can override the above
- Clause 52.37 canopy tree permits in most residential zones (statewide since 15 September 2025).
- Planning scheme overlays (VPO / SLO / ESO).
- Bushfire (BMO) clearing entitlements in designated areas.
- Federal EPBC Act for nationally listed species/communities.
Do I need a permit in Melton?
Fill in the tree details and we'll estimate whether you likely need council approval.
Common questions about tree removal in Melton
Do I need a permit to remove a tree in Melton?
Clause 52.37 of every Victorian planning scheme (in force since 15 September 2025) needs a planning permit to remove, destroy or lop a canopy tree (at least 5 metres tall with an average canopy diameter of at least 4 metres) in most residential zones: anywhere on a vacant lot, or within 6 metres of the street frontage or 4.5 metres of the rear boundary where there is a house. Planning overlays on your property (such as a Vegetation Protection Overlay (VPO), Significant Landscape Overlay (SLO) or Environmental Significance Overlay (ESO)) and council local laws can protect other trees. Check your address on VicPlan (mapshare.vic.gov.au) and with your council. Exemptions, such as for dead or dangerous trees, may apply. Confirm with Melton before any work starts.
Which trees are exempt in Melton?
Dead canopy trees, and the part of a tree that presents an immediate risk of injury or damage, are exempt from the Clause 52.37 permit. Overlays and local laws have their own exemptions, so check those too. Maintenance pruning of no more than one third of a canopy tree's foliage is exempt from Clause 52.37 (but not trunk pruning, or pruning that takes the tree below 5m tall or a 4m canopy). Land outside the residential zones covered by Clause 52.37 and without a relevant overlay may not need a planning permit, but local laws can still apply.
How do I lodge a tree removal application with Melton?
We have not yet confirmed Melton's application steps. Contact the council, or search its website for "tree removal application", to find the current form, fees and what to attach. Applications commonly ask for a site plan and photos of the tree, and some councils also ask for an arborist's report.
Which suburbs follow Melton's tree rules?
Suburbs we list in the Melton area include Aintree, Bonnie Brook, Brookfield, Burnside, Burnside Heights, Caroline Springs, Cobblebank, Deanside and 22 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.
How much does tree removal cost in Melton?
Most Australian homeowners pay roughly $800–$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.
More help: VIC tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.
Suburbs in Melton
- Aintree
- Bonnie Brook
- Brookfield
- Burnside
- Burnside Heights
- Caroline Springs
- Cobblebank
- Deanside
- Diggers Rest
- Exford
- Eynesbury
- Fraser Rise
- Grangefields
- Harkness
- Hillside (Melton - Vic.)
- Kurunjang
- Melton
- Melton South
- Melton West
- Mount Cottrell
- Parwan
- Plumpton
- Ravenhall
- Rockbank
- Strathtulloh
- Taylors Hill
- Thornhill Park
- Toolern Vale
- Truganina
- Weir Views