Monash tree removal rules
What to check before removing or pruning a tree in the Monash area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.
Legal basis: Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Monash?
In Monash, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below).
Monash controls tree removal on private land through its planning scheme, not a separate tree local law. In residential zones, Clause 52.37 needs a permit to remove, destroy or lop a canopy tree at least 5m tall with a canopy at least 4m across: anywhere on a vacant site, or within 6m of the front boundary and 4.5m of the rear boundary where there is a dwelling. In the Vegetation Protection Overlay, a permit is needed for vegetation over 10m tall with a trunk circumference over 50cm at 1.2m above ground. A Significant Landscape Overlay applies along Gardiners Creek in Ashwood and Burwood. Council offers a free arborist advice service to residents in VPO areas.
When you may not need approval
- Dead trees
- Only the part of a tree that presents an immediate risk of personal injury or damage to property
- Maintenance pruning of a canopy tree that removes no more than one third of its foliage (not trunk pruning, and not pruning that takes the tree below 5m tall or a 4m canopy)
- In the Vegetation Protection Overlay: willows, radiata (Monterey) pines, evergreen alders, sweet pittosporums and desert ash
How to apply
Planning permit. Canopy tree applications use the VicSmart fast-track process and are generally decided within 10 business days: attach a site plan or photos showing the tree's location, species, height and spread, a cover letter, and an arborist's assessment if the tree is being removed for health or stability. In the Vegetation Protection Overlay, one tree can go through VicSmart (one VicSmart tree application per 12 months); two or more trees need a standard tree removal application with the Certificate of Title, a site plan and a statement justifying removal. Permits usually require replacement canopy trees.
Other rules that can override the above
- Clause 52.37 canopy tree permits in most residential zones (statewide since 15 September 2025).
- Planning scheme overlays (VPO / SLO / ESO).
- Bushfire (BMO) clearing entitlements in designated areas.
- Federal EPBC Act for nationally listed species/communities.
Do I need a permit in Monash?
Fill in the tree details and we'll estimate whether you likely need council approval.
Common questions about tree removal in Monash
Do I need a permit to remove a tree in Monash?
In Monash, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below). Exemptions, such as for dead or dangerous trees, may apply. Confirm with Monash before any work starts.
Which trees are exempt in Monash?
Exemptions listed for Monash include: Dead trees; Only the part of a tree that presents an immediate risk of personal injury or damage to property; Maintenance pruning of a canopy tree that removes no more than one third of its foliage (not trunk pruning, and not pruning that takes the tree below 5m tall or a 4m canopy); In the Vegetation Protection Overlay: willows, radiata (Monterey) pines, evergreen alders, sweet pittosporums and desert ash. Check the council's exact wording before relying on one.
How do I lodge a tree removal application with Monash?
Planning permit. Canopy tree applications use the VicSmart fast-track process and are generally decided within 10 business days: attach a site plan or photos showing the tree's location, species, height and spread, a cover letter, and an arborist's assessment if the tree is being removed for health or stability. In the Vegetation Protection Overlay, one tree can go through VicSmart (one VicSmart tree application per 12 months); two or more trees need a standard tree removal application with the Certificate of Title, a site plan and a statement justifying removal. Permits usually require replacement canopy trees. Check Monash's official tree page (linked on this page) for the current form and fees before you apply.
Which suburbs follow Monash's tree rules?
Suburbs we list in the Monash area include Ashwood, Burwood, Chadstone, Clayton, Glen Waverley, Hughesdale, Huntingdale, Mount Waverley and 6 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.
How much does tree removal cost in Monash?
Most Australian homeowners pay roughly $800โ$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.
More help: VIC tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.