Tree removal in Ripponlea 3185
Thinking of removing or pruning a tree in Ripponlea? The rules here are set by Port Phillip. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Ripponlea
Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Port Phillip?
Trees about 48cm trunk (diameter (converted from 150cm circumference at 1m height)) or larger are generally protected and need approval.
Port Phillip Council requires a permit under Community Amenity Local Law 2023 for any pruning or removal of significant trees on private land. Definition: trunk circumference ≥150cm measured 1m from base. Multi-stemmed trees also covered if combined circumference ≥150cm.
When you may not need approval
- Clause 55 of Community Amenity Local Law 2023 provides exemptions; specific details require council clarification
Do I need a permit in Ripponlea?
Answer a few questions for an instant, indicative result based on Port Phillip's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.
Tree removal in Ripponlea: common questions
Do I need council approval to remove a tree in Ripponlea?
Tree removal in Ripponlea is regulated by Port Phillip. Trees about 48cm trunk (diameter (converted from 150cm circumference at 1m height)) or larger are generally protected and need approval. Use the checker on this page for an indication, then confirm with Port Phillip.
Which council covers Ripponlea?
Ripponlea (3185) is in the Port Phillip local government area.