TreeQuotesKnow the tree rules for your suburbCheck my tree

Yarra Ranges tree removal rules

What to check before removing or pruning a tree in the Yarra Ranges area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.

Get free quotes

We're a free referral service, not an arborist. We collect these details only to match you with licensed arborists. See our Privacy Policy and Terms.

Legal basis: Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.

โ— Researchedยท last checked 2026-11-05official source โ†—

Compiled from the council's published rules and cross-checked. Always confirm with the council.

Which trees are protected in Yarra Ranges?

In Yarra Ranges, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below).

Yarra Ranges says a planning permit is needed to remove a tree from private property unless it is exempt. Its planning guidance ties this to the Vegetation Protection, Significant Landscape, Erosion Management and Environmental Significance overlays, and to native vegetation on land over 4,000 square metres. There is no tree local law for private land. Dead trees are not automatically exempt: council says a permit may still be needed, so ask Planning before removing one. In Bushfire Prone Areas the Clause 52.12 bushfire exemptions can apply to houses built before 10 September 2009.

When you may not need approval

  • Bushfire 10/30 rule (Bushfire Prone Area): trees within 10m of your house, and other vegetation (not trees) within 30m, if the house was built or approved before 10 September 2009
  • Boundary fence clearing (Bushfire Prone Area, fence built before 10 September 2009): up to 4m in total across both sides, split as the two neighbours agree, or up to 1m on one side
  • Listed environmental weeds (no permit or inspection needed)
  • Only the part of a tree that is an immediate risk of injury or property damage
  • Vegetation listed as exempt in the overlay schedule that applies

How to apply

Planning permit. Council says removing a single tree in a Vegetation Protection Overlay can be a VicSmart application, while more than one tree needs a standard planning permit. Include an arborist's report on the tree's health and condition and a site plan showing the tree. For native vegetation on land over 4,000 square metres, a Native Vegetation Removal Report covers most requirements.

Other rules that can override the above

  • Clause 52.37 canopy tree permits in most residential zones (statewide since 15 September 2025).
  • Planning scheme overlays (VPO / SLO / ESO).
  • Bushfire (BMO) clearing entitlements in designated areas.
  • Federal EPBC Act for nationally listed species/communities.

Do I need a permit in Yarra Ranges?

Checking against Yarra Ranges.

Fill in the tree details and we'll estimate whether you likely need council approval.

Common questions about tree removal in Yarra Ranges

Do I need a permit to remove a tree in Yarra Ranges?

In Yarra Ranges, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below). Exemptions, such as for dead or dangerous trees, may apply. Confirm with Yarra Ranges before any work starts.

Which trees are exempt in Yarra Ranges?

Exemptions listed for Yarra Ranges include: Bushfire 10/30 rule (Bushfire Prone Area): trees within 10m of your house, and other vegetation (not trees) within 30m, if the house was built or approved before 10 September 2009; Boundary fence clearing (Bushfire Prone Area, fence built before 10 September 2009): up to 4m in total across both sides, split as the two neighbours agree, or up to 1m on one side; Listed environmental weeds (no permit or inspection needed); Only the part of a tree that is an immediate risk of injury or property damage; Vegetation listed as exempt in the overlay schedule that applies. Check the council's exact wording before relying on one.

How do I lodge a tree removal application with Yarra Ranges?

Planning permit. Council says removing a single tree in a Vegetation Protection Overlay can be a VicSmart application, while more than one tree needs a standard planning permit. Include an arborist's report on the tree's health and condition and a site plan showing the tree. For native vegetation on land over 4,000 square metres, a Native Vegetation Removal Report covers most requirements. Check Yarra Ranges' official tree page (linked on this page) for the current form and fees before you apply.

Which suburbs follow Yarra Ranges' tree rules?

Suburbs we list in the Yarra Ranges area include Badger Creek, Beenak, Belgrave, Belgrave Heights, Belgrave South, Big Pats Creek, Cambarville, Chirnside Park and 60 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.

How much does tree removal cost in Yarra Ranges?

Most Australian homeowners pay roughly $800โ€“$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.

More help: VIC tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.

Suburbs in Yarra Ranges

We use essential cookies to run this site and, with your consent, analytics cookies to improve it. See our cookie policy.