Tree removal in Beaconsfield
Thinking of removing or pruning a tree in Beaconsfield? The rules here are set by Fremantle. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Beaconsfield
Local Planning Schemes and local laws; Environmental Protection Act 1986 (native vegetation clearing).
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Fremantle?
Trees about 8m tall or 48cm trunk (circumference at 1.4m above ground level) or larger are generally protected and need approval.
Policy applies only to Development Areas, Industrial-zoned land, and residential R-Code R30 and below. Protection is triggered by size thresholds: height ≥8m OR trunk circumference ≥1.5m (≈48cm diameter) at 1.4m above ground OR canopy diameter ≥6m average. Policy includes general presumption against tree-damaging activity; development approval required even for works normally exempt. If removal approved, 2 replacement trees minimum 30-litre pot required.
When you may not need approval
- Maintenance pruning only
- Tree outside application area (Development Areas, Industrial zones, R30+ residential)
- Palm trees
- Prior development approval
Do I need a permit in Beaconsfield?
Answer a few questions for an instant, indicative result based on Fremantle's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.