Tree removal in Box Hill
Thinking of removing or pruning a tree in Box Hill? The rules here are set by Whitehorse. Check whether you likely need approval, then get free quotes from licensed local arborists.
Tree rules in Box Hill
Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Whitehorse?
In Whitehorse, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below).
Whitehorse controls tree removal on private land through its planning scheme. Every residential area has some protection under Clause 52.37: a permit is needed to remove, lop or destroy a canopy tree (5m or taller with a canopy at least 4m across) within 6m of the front boundary or 4.5m of the rear boundary. Many properties also carry a Significant Landscape Overlay (in SLO 1 to 8, trees with a trunk circumference of 50cm or more at 1m are protected, and works within 4m of one need a permit), a Vegetation Protection Overlay protecting specific listed trees, an Environmental Significance Overlay or a Heritage Overlay. Council says trees must be assessed against the overlays and Clause 52.37 separately. Native vegetation, including dead vegetation, is protected on lots over 4,000 square metres.
When you may not need approval
- Dead trees and emergency works (Clause 52.37)
- Species on the Victorian noxious weed list
- In SLO 1 to 8: pruning for regeneration or ornamental shaping, and trees dead or dying to Council's satisfaction
- In the Environmental Significance Overlay: non-native vegetation, listed environmental weeds, and dead vegetation with a trunk under 40cm at 1.3m
Do I need a permit in Box Hill?
Answer a few questions for an instant, indicative result based on Whitehorse's rules.
Fill in the tree details and we'll estimate whether you likely need council approval.
Tree removal in Box Hill: common questions
Do I need council approval to remove a tree in Box Hill?
Tree removal in Box Hill is regulated by Whitehorse. In Whitehorse, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below). Use the checker on this page for an indication, then confirm with Whitehorse.
Which council covers Box Hill?
Box Hill is in the Whitehorse local government area.