Whitehorse tree removal rules
What to check before removing or pruning a tree in the Whitehorse area: which trees are protected, the main exemptions, and how to apply for approval. This is the summary we keep for this council; always confirm against the official source linked below.
Legal basis: Planning and Environment Act 1987 + Clause 52.37 Canopy trees (all planning schemes) + local planning scheme overlays (Vegetation Protection, Significant Landscape, Environmental Significance); VicSmart fast-track permits.
Compiled from the council's published rules and cross-checked. Always confirm with the council.
Which trees are protected in Whitehorse?
In Whitehorse, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below).
Whitehorse controls tree removal on private land through its planning scheme. Every residential area has some protection under Clause 52.37: a permit is needed to remove, lop or destroy a canopy tree (5m or taller with a canopy at least 4m across) within 6m of the front boundary or 4.5m of the rear boundary. Many properties also carry a Significant Landscape Overlay (in SLO 1 to 8, trees with a trunk circumference of 50cm or more at 1m are protected, and works within 4m of one need a permit), a Vegetation Protection Overlay protecting specific listed trees, an Environmental Significance Overlay or a Heritage Overlay. Council says trees must be assessed against the overlays and Clause 52.37 separately. Native vegetation, including dead vegetation, is protected on lots over 4,000 square metres.
When you may not need approval
- Dead trees and emergency works (Clause 52.37)
- Species on the Victorian noxious weed list
- In SLO 1 to 8: pruning for regeneration or ornamental shaping, and trees dead or dying to Council's satisfaction
- In the Environmental Significance Overlay: non-native vegetation, listed environmental weeds, and dead vegetation with a trunk under 40cm at 1.3m
How to apply
Planning permit. Check your overlays on Whitehorse Maps and any earlier planning permit's landscape plan first. One tree can go through VicSmart if you have not had a VicSmart tree permit approved in the last 12 months; otherwise lodge a regular application online using the matching checklist (VicSmart, SLO or VPO tree removal), with the title and an arborist report. Replacement trees are often required. For written confirmation that no permit is needed, lodge a Planning Information Request (a fee applies).
Other rules that can override the above
- Clause 52.37 canopy tree permits in most residential zones (statewide since 15 September 2025).
- Planning scheme overlays (VPO / SLO / ESO).
- Bushfire (BMO) clearing entitlements in designated areas.
- Federal EPBC Act for nationally listed species/communities.
Do I need a permit in Whitehorse?
Fill in the tree details and we'll estimate whether you likely need council approval.
Common questions about tree removal in Whitehorse
Do I need a permit to remove a tree in Whitehorse?
In Whitehorse, removing or significantly pruning a protected tree generally needs council approval unless an exemption applies (see below). Exemptions, such as for dead or dangerous trees, may apply. Confirm with Whitehorse before any work starts.
Which trees are exempt in Whitehorse?
Exemptions listed for Whitehorse include: Dead trees and emergency works (Clause 52.37); Species on the Victorian noxious weed list; In SLO 1 to 8: pruning for regeneration or ornamental shaping, and trees dead or dying to Council's satisfaction; In the Environmental Significance Overlay: non-native vegetation, listed environmental weeds, and dead vegetation with a trunk under 40cm at 1.3m. Check the council's exact wording before relying on one.
How do I lodge a tree removal application with Whitehorse?
Planning permit. Check your overlays on Whitehorse Maps and any earlier planning permit's landscape plan first. One tree can go through VicSmart if you have not had a VicSmart tree permit approved in the last 12 months; otherwise lodge a regular application online using the matching checklist (VicSmart, SLO or VPO tree removal), with the title and an arborist report. Replacement trees are often required. For written confirmation that no permit is needed, lodge a Planning Information Request (a fee applies). Check Whitehorse's official tree page (linked on this page) for the current form and fees before you apply.
Which suburbs follow Whitehorse's tree rules?
Suburbs we list in the Whitehorse area include Blackburn, Blackburn North, Blackburn South, Box Hill, Box Hill North, Box Hill South, Burwood, Burwood East and 8 more. Some suburbs sit across two council areas, so confirm which council covers your exact address.
How much does tree removal cost in Whitehorse?
Most Australian homeowners pay roughly $800โ$3,500 to have a tree removed. The full range runs from about $200 for a small tree with clear access to $15,000 or more for a very large or hard-to-reach tree near buildings or powerlines. Council application fees, an arborist's report and stump grinding can add to that. The only way to know your price is a free on-site quote from a local arborist.
More help: VIC tree removal laws, is my tree protected?, getting an arborist report and the tree removal cost guide.